Customization: | Available |
---|---|
After-sales Service: | 12 Month |
Warranty: | 12 Month |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1.Product Introduction
We Lahoo Auto Parts specializes in Spring Brake Chambers T3030 for many years.
We can supply Volvo truck spring brake chamber, spring brake chamber, Man brake chamber, Benz brake chamber.
Air brake chambers are round metal containers, located at each wheel, where compressed air is converted into mechanical force to apply
the brakes and stop the vehicle.There are two kinds of air brake chambers: service brake chamber and spring brake chamber.
The service brake chamber is used when only the application of service brake air is required on an axle.
There will be no emergency braking provided on this axle.
You will find service brake chambers on steer axles, some rear axles, and old trailers that use a relay emergency valve
to apply parking air pressure to the service chamber.
The spring brake chamber consists of the service brake and parking/emergency brake.
The service brake is the section at the clamp closest to the axle. The diaphragm, pushrod and return spring may be
serviced by removing the clamp. The spring/emergency brake is everything from the first clamp to the end farthest from the axle.
The spring brake must be completely replaced if it is faulty.
2.Product Specification
Item No. |
Stroke |
R1 | R2 | L1 | L2 | L4 | Push Rod Thread | Air Inlet Thread | Mounting Bolt Thread |
mm | mm | mm | mm | mm | mm | ||||
LHC-T3030 | 64 | 125 | 105 | 238±5 | 285±5 | 255±5 | 5/8''-18UNF2A | 3/8''-18NPTF | 5/8''-11UNC2A |
3.Product Features
Material: Steel & rubber
Max operating pressure: 800Kpa ~ 1Mpa
Operating temperature: -40 °C~+80 °C
Stroke: 0-76mm
Life-time: Service Chamber: ≥1000000 times
Life-time: Parking Chamber: ≥200000 times
Application: Volvo, Man, Benz, Hino, etc.
Leading Standard: SAE J1469-95 by Society of Automobile Engineers USA